| Machinery Performance Table | |||||
| Alloy brand No. | Toughness | Thickness（mm） | Tension（kgf/cm2） | Peel Strength （kgf/cm2） |
Elongation（%） |
| 3003 | H14（H24） | 0.8-1.3 | >14 | >12 | >4 |
| 1.3-2.9 | >5 | ||||
| 5052 | H12（H32） | 0.8-1.3 | 22-27 | >16 | >5 |
| 1.3-2.9 | >7 | ||||
| H14（H34） | 0.8-1.3 | 24-29 | >18 | >4 | |
| 1.3-2.9 | >6 | ||||
| Aluminum Alloy Plate Performance | ||||
| Type of aluminium alloy | Tensile strength(N/mm2) | Deflection strength (N/mm2) |
Elongation% | Internal radiu s of ben ding（2mm thick） |
| 1050AH44 | 100-145 | 80 | 4以上 | R=2mmX1 |
| 1200H44 | 110-150 | 90 | 4以上 | R=2mmX1 |
| 3003H44 | 140-185 | 110 | 4以上 | R=2mmX1.5 |
| 3005H44 | 165-215 | 135 | 3以上 | R=2mmX1.5 |
| 5754H42 | 220-270 | 140 | 6以上 | R=2mmX1.5 |
| Performance | ||||
| Type of aluminium alloy | Tensile strength | Deflection strength | Elongation% | Internal radiu s of ben ding（2mm thick） |
| 5052H44 | 230-280 | 180 | <4 | R=2mmX2.5 |
| Processing tolerance | |||||||||||||||||
| 3003 | 5052 | ||||||||||||||||
| Specification | Width | 900-1400 | 900-1200 | 1200-1400 | |||||||||||||
| Thickness | 1.1-1.7 | 1.7-1.9 | 1.9-2.4 | 2.4-2.7 | 2.7-3.6 | 1.1-1.7 | 1.7-1.9 | 1.9-2.4 | 2.4-2.7 | 2.7-3.2 | 1.1-1.7 | 1.7-1.9 | 1.9-2.4 | 2.4-2.7 | 2.7-3.2 | ||
| Tolerance | Width | ±1 | ±0.1 | ±0.1 | |||||||||||||
| Thickness | ±0.10 | ±0.10 | ±0.10 | ±0.30 | ±0.30 | ±0.10 | ±0.10 | ±0.10 | ±0.30 | ±0.30 | ±0.10 | ±0.10 | ±0.10 | ±0.30 | ±0.30 | ||
| Length | ≤2000 | ±1 | ±1 | ±1 | |||||||||||||
| ≤2000 | ±2 | ±2 | ±2 | ||||||||||||||
| Chemical elements table | |||||||||||
| （Alloy） | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Other | AI | |
| Individual | Total | ||||||||||
| 3003 | <0.60 | <0.70 | 0.05-0.20 | 1.0-1.5 | -- | -- | <0.10 | -- | <0.05 | <0.15 | Remaining |
| 5052 | <0.25 | <0.40 | <0.10 | <0.10 | 2.2-2.8 | 0.15-0.35 | <0.10 | -- | <0.05 | <0.15 | Remaining |